Remote-Control Commands
Satellite Navigation
355
User Manual 1178.6379.02 ─ 01
[:SOURce<hw>]:BB:GNSS:SVID<ch>:SBAS:SDYNamics:PRANge
<PRange>
[:SOURce<hw>]:BB:GNSS:SVID<ch>:GPS:SDYNamics:PRANge
<PRange>
Sets the initial pseudorange.
Parameters:
<PRange>
float
Range:
0 to ((0.2*SPEED_OF_LIGHT))
Increment: 0.001
*RST:
0
Example:
See
Example "Configuring the signal dynamics"
Manual operation:
See
[:SOURce<hw>]:BB:GNSS:SVID<ch>:QZSS:SDYNamics:VELocity
<Velocity>
[:SOURce<hw>]:BB:GNSS:SVID<ch>:GALileo:SDYNamics:VELocity
<Velocity>
[:SOURce<hw>]:BB:GNSS:SVID<ch>:GLONass:SDYNamics:VELocity
<Velocity>
[:SOURce<hw>]:BB:GNSS:SVID<ch>:SBAS:SDYNamics:VELocity
<Velocity>
[:SOURce<hw>]:BB:GNSS:SVID<ch>:BEIDou:SDYNamics:VELocity
<Velocity>
[:SOURce<hw>]:BB:GNSS:SVID<ch>:GPS:SDYNamics:VELocity
<Velocity>
Sets the constant velocity.
Parameters:
<Velocity>
float
Range:
-100E3 to 100E3
Increment: 0.01
*RST:
0
Example:
SOURce1:BB:GNSS:SVID1:GPS:SDYNamics:PROFile CONStant
SOURce1:BB:GNSS:SVID1:GPS:SDYNamics:VELocity 100
Manual operation:
See
[:SOURce<hw>]:BB:GNSS:SVID<ch>:QZSS:SDYNamics:TOFFset
<TimeOffset>
[:SOURce<hw>]:BB:GNSS:SVID<ch>:GALileo:SDYNamics:TOFFset
<TimeOffset>
[:SOURce<hw>]:BB:GNSS:SVID<ch>:GLONass:SDYNamics:TOFFset
<TimeOffset>
[:SOURce<hw>]:BB:GNSS:SVID<ch>:SBAS:SDYNamics:TOFFset
<TimeOffset>
[:SOURce<hw>]:BB:GNSS:SVID<ch>:BEIDou:SDYNamics:TOFFset
<TimeOffset>
[:SOURce<hw>]:BB:GNSS:SVID<ch>:GPS:SDYNamics:TOFFset
<TimeOffset>
Sets a time delay before the profile is applied.
Parameters:
<TimeOffset>
float
Range:
0 to 9E4
Increment: 0.1
*RST:
0
Example:
See
Example "Configuring the signal dynamics"
Manual operation:
See
Signal Dynamics