Remote-Control Commands
Satellite Navigation
378
User Manual 1178.6379.02 ─ 01
Manual operation:
See
[:SOURce<hw>]:BB:GNSS:LOGGing:CATegory:UMOTion[:CSV]:ACCeleration:
ECEF
<State>
[:SOURce<hw>]:BB:GNSS:LOGGing:CATegory:UMOTion[:CSV]:ATTitude
<State>
[:SOURce<hw>]:BB:GNSS:LOGGing:CATegory:UMOTion[:CSV]:ATTitude:
ACCeleration
<State>
[:SOURce<hw>]:BB:GNSS:LOGGing:CATegory:UMOTion[:CSV]:ATTitude:JERK
<State>
[:SOURce<hw>]:BB:GNSS:LOGGing:CATegory:UMOTion[:CSV]:ATTitude:RATE
<State>
[:SOURce<hw>]:BB:GNSS:LOGGing:CATegory:UMOTion[:CSV]:GDOP
<State>
[:SOURce<hw>]:BB:GNSS:LOGGing:CATegory:UMOTion[:CSV]:GSPeed
<State>
[:SOURce<hw>]:BB:GNSS:LOGGing:CATegory:UMOTion[:CSV]:HDOP
<State>
[:SOURce<hw>]:BB:GNSS:LOGGing:CATegory:UMOTion[:CSV]:JERK:ECEF
<State>
[:SOURce<hw>]:BB:GNSS:LOGGing:CATegory:UMOTion[:CSV]:PDOP
<State>
[:SOURce<hw>]:BB:GNSS:LOGGing:CATegory:UMOTion[:CSV]:POSition:ECEF
<State>
[:SOURce<hw>]:BB:GNSS:LOGGing:CATegory:UMOTion[:CSV]:POSition:ENU
<State>
[:SOURce<hw>]:BB:GNSS:LOGGing:CATegory:UMOTion[:CSV]:POSition:LLA
<State>
[:SOURce<hw>]:BB:GNSS:LOGGing:CATegory:UMOTion[:CSV]:TDOP
<State>
[:SOURce<hw>]:BB:GNSS:LOGGing:CATegory:UMOTion[:CSV]:VELocity:ECEF
<State>
[:SOURce<hw>]:BB:GNSS:LOGGing:CATegory:UMOTion[:CSV]:VELocity:LNED
<State>
[:SOURce<hw>]:BB:GNSS:LOGGing:CATegory:UMOTion[:CSV]:VDOP
<State>
Enables the parameter for logging.
Parameters:
<State>
0 | 1 | OFF | ON
*RST:
1
Example:
See
Example "Enabling data logging"
Manual operation:
See
"Logged User Motion Parameters"
19.16 Advanced Mode Commands
Option: R&S
SMW-K120
Advanced Mode Commands