Remote-Control Commands
Satellite Navigation
385
User Manual 1178.6379.02 ─ 01
[:SOURce<hw>]:BB:GNSS:TRIGger:OUTPut<ch>:DELay
<Delay>
Defines the delay between the signal on the marker outputs and the start of the sig-
nals.
Parameters:
<Delay>
float
Range:
0 to 182.2 ms
*RST:
0
Default unit: s
Example:
See
Chapter 19.17, "Trigger Settings"
Manual operation:
See
[:SOURce<hw>]:BB:GNSS:TRIGger:OBASeband:DELay
<Delay>
Specifies the trigger delay for triggering by the signal from the second path.
Parameters:
<Delay>
float
Range:
0 to 65535
Increment: 0.01
*RST:
0
Example:
See
Chapter 19.17, "Trigger Settings"
Manual operation:
See
"External Delay/Trigger Delay"
[:SOURce<hw>]:BB:GNSS:TRIGger:OBASeband:INHibit
<Inhibit>
For triggering via the other path, specifies the number of samples by which a restart is
inhibited.
Parameters:
<Inhibit>
integer
Range:
0 to 67108863
*RST:
0
Example:
See
Chapter 19.17, "Trigger Settings"
Manual operation:
See
"External Inhibit/Trigger Inhibit"
[:SOURce<hw>]:BB:GNSS:TRIGger[:EXTernal]:DELay
<Delay>
Specifies the trigger delay for external triggering. The value affects all external trigger
signals.
Parameters:
<Delay>
float
Range:
0 to 2147483647
Increment: 0.01
*RST:
0
Trigger Settings
