Receiver Type and Position
Satellite Navigation
42
User Manual 1178.6379.02 ─ 01
7.2 Static Receiver
Access:
1. Select "GNSS > Simulation Configuration > Receiver".
2. Select "Positioning" >
"Static"
.
3. Select "Positioning Configuration".
Settings
................................................................................................ 42
Location Coordinates, Position Format
......................................................................... 44
...............................................................................................44
Yaw/Heading, Pitch/Elevation, (Start) Roll/Bank
............................................ 45
................................................................................................. 46
Location, Start Location
Selects the geographic location of the GNSS receiver. Coordinates representation
depends on the selected "Reference Frame" and "Position Format".
"User Defined" Sets the receiver position in terms of "Latitude", "Longitude" and "Alti-
tude"
Static Receiver