Instrument Tour
R&S
®
SZU100A
13
Manual 1425.3061.02 ─ 04
6
Instrument Tour
6.1
Front View
Test port adapter (waveguide port)
At the front, the R&S
SZU covers the interface to the DUT, that is the output of the
RF signal.
Table 6-1: R&S
SZU IQ Upconverter front views
R&S
SZU with standard WR15
waveguide flange, without any
adapter
R&S
SZU with test port
adapter
R&S
SZU with waveguide to
V-connector adapter
To avoid damage as a result of wear and tear of the waveguide port, it is recom-
mended that you mount a test port adapter for the corresponding frequency band.
The precision waveguide flange of the test port adapter is equipped with two
alignment pins and two holes that receive the alignment pins of the DUT. Two
additional holes in the middle allow you to insert additional alignment of pins that
are included. Use the extra pins, when the flange of the DUT provides the corre-
sponding holes. In particular, if the DUT has thin pins, these additional pins
improve the alignment and stability of the connection.
Front View
