Startup
R&S
®
SZU100A
19
Manual 1425.3061.02 ─ 04
Protection of waveguide flanges
Protect the waveguide flanges of the IQ upconverter against mechanical damage.
Always use a torque wrench to tighten the screws of the waveguide flanges.
Shield the waveguides from dust and moisture, and avoid scratching the contact
surfaces. We recommend that you use a test port adapter.
When the IQ upconverter is not in use, leave the test port adapter mounted and
attach one of the included protective caps to the adapter.
Avoid heavy shocks
Heavy shocks can damage the hardware of the IQ upconverter.
For shipping or storing the device, make sure that it is packed with shockproof
packaging materials in a sturdy cardboard box of suitable size, see also
7.1
System Requirements
To operate an IQ upconverter, you need:
●
An R&S
SZU IQ Upconverter.
●
The R&S
SMW as signal source, which can generate the local oscillator signal
within the frequency range of your R&S
SZU and a level as specified in the
data sheet.
●
A test port adapter, if necessary.
●
Cables set:
– Four I/Q cables, included
– An RF cable, included
– The USB cable, included
– A trigger cable, optionally
System Requirements
