Configuring the R&S
TSMA6
R&S
®
TSMA6
41
Getting Started 4900.8040.02 ─ 07
2. Configure the following settings.
● Autostart
● Workspace File
In the drop-down menu, select a ROMES workspace file (see
● Recording
Activating this checkbox, the SmartONE measurement data are written to
the TSMA6 hard disk.
● IP Controlled
Activating this checkbox, you can control the SmartONE measurement via
IP from an external host PC.
3. Click "Submit" to save your selection.
For more details about the R&S
SmartONE configuration and usage, refer to the
user documentation for R&S
SmartONE.
6.4
Import of Workspace Files (NESTOR, ROMES)
Import NESTOR workspace file
1. Start the R&S
TSMA6 web GUI from the host PC (see
2. Navigate to "Configuration" > "System" > "Mode" and set measurement mode
to "NESTOR Probe".
3. Press "Submit" and wait until the device is in "NESTOR Probe" mode. (In the
status bar, the entry is "No error".)
4. Navigate to "File Transfer" and press the "Browse..." button in the "Upload"
section.
5. Search on the host PC for the NESTOR workspace file to be imported and
confirm the dialog with "Open".
6. Press "Upload".
The file is copied to the NESTOR workspace directory (default:
D:\Users\Instrument\Documents\NESTOR\FavoriteWorkspaces
).
This path can be configured in the "File Transfer" menu.
Import of Workspace Files (NESTOR, ROMES)
