Configuring the R&S TSMA6B
R&S
®
TSMA6B
47
User Manual 4901.4026.02 ─ 01
Figure 6-6: Switch to scanner mode
1 = CPU switch
2 = LAN port
2. Switch off the R&S TSMA6B.
3. Then switch the R&S TSMA6B on again.
The R&S TSMA6B is in scanner mode and can be accessed via the LAN port (2)
with the IP address 192.168.0.2
The Status LED "Mode" (see
- 9) indicates the scanner mode by a blinking
blue color.
Standard Mode
To use the R&S TSMA6B in standard mode, proceed as follows.
1. Use a pointed object to push the CPU switch (1) to position I.
2. After a power cycle, the R&S TSMA6B starts in normal mode.
Selecting measurement mode
