Preparing for use
R&S
®
ZN-Z15x
5
User Manual 1337.5963.02 ─ 04
Automatic calibration is faster and less error-prone than manual calibration:
●
There is no need to connect calibration standards manually, which is particu-
larly time-saving if you want to calibrate multiple ports.
●
Invalid calibrations due to operator errors (e.g. wrong standards or improper
connections) are almost excluded.
●
There is no need to handle calibration kit data.
●
The internal standards do not wear out because they are switched electroni-
cally.
The R&S
ZN-Z15x calibration units differ in the number of calibration ports and
the connector types. For an overview, refer to the data sheet.
3
Preparing for use
Here, you can find basic information about setting up the product for the first time.
3.1
Unpacking and checking
1. Unpack the product carefully.
2. Retain the original packing material. Use it when transporting or shipping the
product later.
3. Using the delivery notes, check the equipment for completeness.
4. Check the equipment for damage.
If the delivery is incomplete or equipment is damaged, contact
Rohde
&
Schwarz.
Unpacking and checking
