Command reference
R&S
®
ZNB/ZNBT
1338
User Manual 1173.9163.02 ─ 62
Suffix:
<Ch>
.
Channel number.
<Grp>
Port group number.
In "set direction" this must be 1 (or omitted). In "get direction"
also port groups created using
ZNBT only).
Parameters:
<arg0>
<arg1>
First and last logical port number in the port group. Must be
omitted if the command is used as a query.
Example:
See
SOURce<Ch>:GROup<Grp>:CLEar
[<arg0>]
Dissolves port group
<Grp>
or all port groups created using
on page 1337 or
Suffix:
<Ch>
.
Channel number.
<Grp>
Port group number.
Setting parameters:
<arg0>
ALL
If
ALL
is specified, all port groups are dissolved and a default
port group 1, consisting of all available ports, is restored; the
<Grp>
suffix is ignored.
If
ALL
is omitted, only the specified port group is dissolved,
except the deleted port group was the only one, in which case
again default port group 1 is restored. In case an undefined port
group number is used, the analyzer generates an error mes-
sage.
Example:
See
Usage:
Setting only
SOURce<Ch>:GROup:COUNt?
Queries the number of port groups in channel no.
<Ch>
.
Suffix:
<Ch>
.
Channel number.
Example:
See
Usage:
Query only
Manual operation:
See
SCPI command reference
