GUI reference
R&S
®
ZNB/ZNBT
374
User Manual 1173.9163.02 ─ 62
5.6.1.1
Controls on the Limit Test tab
The "Define Limit Line..." button opens the "Define Limit Lines" dialog (see
ter 5.6.1.2, "Define Limit Lines dialog"
Show Limit Line
Shows or hides the limit line associated with the active trace in a Cartesian diagram
area.
The limit line colors are defined in the
Define User Color Scheme dialog
(System >
[Display] > "Config" > "Define User Color..."). You can choose between various options:
●
Display upper and lower limit lines with different colors.
●
Assign the same color to traces and associated limit lines.
●
Assign different colors to limit line segments with disabled limit check.
Note:
Displaying the limit line and limit check are independent of each other: Hiding
the limit line does not switch off the limit check.
Remote command:
CALCulate<Chn>:LIMit:DISPlay[:STATe]
Lines softtool
