Command reference
R&S
®
ZNB/ZNBT
1072
User Manual 1173.9163.02 ─ 62
Example:
See
Usage:
Query only
Manual operation:
See
CONFigure:TRACe<Trc>:NAME
<TraceName>
Assigns a name to an existing trace number
<Trc>
. Note that it is not possible to
assign the same name to two different traces.
a list of all traces in the active recall set with their names.
Suffix:
<Trc>
.
Number of an existing trace.
Parameters:
<TraceName>
Trace name, e.g.
'Ch2Trc2'
.
*RST:
'Trc1'
Example:
See
CONFigure:TRACe<Trc>:NAME:ID?
<TraceName>
Queries the trace number (numeric suffix) of a trace with known trace name.
returns a list of all traces in the active recall set with
their names.
Suffix:
<Trc>
.
Trace number. This suffix is not relevant and may be omitted
(the command returns the actual trace number).
Query parameters:
<TraceName>
Trace name, e.g. 'Ch2Trc2'.
Example:
See
Usage:
Query only
CONFigure:TRACe<Trc>:REName
<OldTraceName>, <NewTraceName>
Assigns a new name to a trace. The trace does not have to be the active trace.
Suffix:
<Trc>
.
Trace number. This suffix is ignored; the trace is identified via its
<TraceName>
Setting parameters:
<OldTraceName>
String parameter with old trace name, e.g.
'Trc1'
<NewTraceName>
String parameter with new trace name, e.g.
'S11 Trace'
*RST:
n/a
Example:
See
CONFigure:CHANnel<Ch>:TRACe:REName
SCPI command reference
