Command reference
R&S
®
ZNB/ZNBT
1111
User Manual 1173.9163.02 ─ 62
Usage:
Setting only
Tip:
When working with the
, switch to raw mode ("Options > Raw
mode" in the IECWIN32 GUI) before executing this command.
DISPlay:MENU:KEY:SELect
<MenuKey>
Activates the softtool tab with identifier <MenuKey>.
Use
DISPlay:MENU:KEY:TOOL:CATalog?
to display the available identifiers.
Note
that no error is generated if a valid <MenuKey> is specified but the tab cannot be
activated for any other reason.
Setting parameters:
<MenuKey>
Identifier of a softtool tab
Example:
*RST; DISP:MENU:KEY:SEL ':Meas:SParams'
Activates the "S-Params" tab of the "Meas" softtool.
Usage:
Setting only
Tip:
When working with the
, switch to raw mode ("Options > Raw
mode" in the IECWIN32 GUI) before executing this command.
DISPlay:MENU:KEY:TOOL:CATalog?
Displays the identifiers of the available softtool tabs as a comma-separated list of
strings.
Use
Usage:
Query only
DISPlay:RFSize
<RelFontSize>
Defines the size of the fonts in the diagram on a relative scale.
Parameters:
<RelFontSize>
Relative font size
Range:
80 % to 170 %
*RST:
100 %
Default unit: percent
Example:
*RST; :DISP:RFS 80
Use smaller fonts to gain more space for the traces in the dia-
gram.
Manual operation:
See
DISPlay[:WINDow<Wnd>]:CATalog?
Returns the numbers and names of all diagrams in the current recall set.
SCPI command reference
