Command reference
R&S
®
ZNB/ZNBT
1144
User Manual 1173.9163.02 ─ 62
MMEMory:DELete
<File>[, <Force>]
Removes a file from the specified directory.
Setting parameters:
<File>
Mandatory string parameter containing the path and file name of
the removed file. If the path is omitted, the current directory is
used (see
<Force>
FORCe
Optional parameter, allows you to delete read-only files, too.
Example:
MMEM:DEL 'C:\Users\Public\TEST01.HCP'
Remove file
TEST01.HCP
from the directory
C:
\Users\Public
. The file must not be read-only; otherwise the
additional parameter
FORCe
is required.
Usage:
Setting only
MMEMory:DELete:CORRection
<CalGroupName>
Deletes a system error correction data set stored in the cal pool (cal group file).
Setting parameters:
<CalGroupName>
String parameter to specify the name of the cal group file to be
deleted. Cal group files must have the extension
*.cal
. The
directory path must not be specified; the analyzer always uses
the default cal pool directory
C:\Users\Public\Documents\Rohde-Schwarz\Vna\
Calibration\Data
.
Example:
See
Usage:
Setting only
Manual operation:
See
MMEMory:FAVorite<FavId>
<RecallSetFile>
Manages the list of favorite recall sets
Suffix:
<FavId>
.
Position in the favorites list
Setting parameters:
<RecallSetFile>
File path, either absolute or relative to the current directory (see
). The empty string represents an empty
position in the favorites list.
Note that when a non-empty favorite is set, the target recall set
must exist.
SCPI command reference
