Command reference
R&S
®
ZNB/ZNBT
1171
User Manual 1173.9163.02 ─ 62
Example:
*RST
Reset the analyzer, creating the default trace no. 1 in channel
no. 1.
CALC:MARK ON; MARK:X 1GHz
Create marker no. 1 and place it to 1 GHz.
CALC:MARK2 ON; MARK2:X 2GHz
Create a second marker and place it to 2 GHz.
MMEM:STOR:MARK 'Marker.txt'
Store the marker values to an ASCII file. The file contains both
marker values, e.g.:
Trc1 S21
Mkr 1 1.000000 GHz -4.900 dB
Mkr 2 2.000000 GHz -6.807 dB
Usage:
Setting only
Manual operation:
See
MMEMory:STORe:RIPPle
<TraceName>, <RippleLimFile>
Saves the ripple limits associated with a specified trace to a ripple limit file. Ripple limit
definitions are created using the
CALCulate<Chn>:RIPPle...
commands.
Setting parameters:
<TraceName>
Name of an existing trace in the active setup (string parameter)
for which a ripple limit definition exists.
<RippleLimFile>
String parameter to specify the name and directory of the cre-
ated ripple limit file. The default extension (manual control) for
ripple limit files is
*.ripple
, although other extensions are
allowed.
If no path is specified the analyzer searches the current direc-
tory, to be queried with
Example:
See
Usage:
Setting only
Manual operation:
See
"Recall Ripple Test.../Save Ripple Test..."
MMEMory:STORe:SEGMent
<Channel>, <SweepSegFile>
Saves the sweep segment definition of the related channel to a an ASCII file. Sweep
segments are defined using
Setting parameters:
<Channel>
Channel number
SCPI command reference
