Command reference
R&S
®
ZNB/ZNBT
1291
User Manual 1173.9163.02 ─ 62
Parameters:
<Resistance>
Range:
0 Ohm to 1E+9 Ohm
*RST:
50 Ohm
Default unit: Ohm
Example:
See
Manual operation:
See
[SENSe<Ch>:]PAE:PARameters:U
<Voltage>
Defines the constant DC supply voltage U
0
for the PAE measurement (measurement
type "Constant Voltage Source"; see example).
Suffix:
<Ch>
.
Channel number
Parameters:
<Voltage>
*RST:
0 V
Default unit: V
Example:
See
Manual operation:
See
[SENSe<Ch>:]PAE:TYPE
<Type>
Selects the measurement type for the Power Added Efficiency (PAE) measurement.
The three measurement types involve different test setups, input parameters, and DC
voltage measurements.
Suffix:
<Ch>
.
Channel number
Parameters:
<Type>
VOLTage | CURRent | VCURrent
Constant voltage source, constant current source, voltage and
current
*RST:
VOLTage
SCPI command reference
