Command reference
R&S
®
ZNB/ZNBT
1440
User Manual 1173.9163.02 ─ 62
SYSTem:COMMunicate:SNMP:USM:USER:DELete:ALL
................................................. 1442
SYSTem:COMMunicate:SNMP:VERSion
........................................................................1442
SYSTem:COMMunicate:REST:ENABle
...........................................................................1443
SYSTem:COMMunicate:SNMP:COMMunity:RO
<CommunityString>
Defines the SNMP community string for read-only access.
Prerequisites for this command:
●
Select an SNMP version that supports communities (
Setting parameters:
<CommunityString> String containing the community name.
Example:
//Set community name
SYST:COMM:SNMP:VERS V12
SYST:COMM:SNMP:COMM:RO 'ABC'
Usage:
Setting only
Manual operation:
See
SYSTem:COMMunicate:SNMP:COMMunity:RW
<CommunityString>
Defines the SNMP community string for read-write access.
Prerequisites for this command:
●
Select an SNMP version that supports communities (
Setting parameters:
<CommunityString> String containing the community name.
Example:
//Set read-write access
SYST:COMM:SNMP:VERS V12
SYST:COMM:SNMP:COMM:RW 'ABC'
Usage:
Setting only
Manual operation:
See
SYSTem:COMMunicate:SNMP:CONTact
<SnmpContact>
Defines the SNMP contact information for the administrator.
You can also set the contact information via SNMP if you do not set it via SCPI.
Parameters for setting and query:
<SnmpContact>
String containing SNMP contact.
*RST:
"" (empty string)
Example:
//Set SNMP contact
SYST:COMM:SNMP:CONT 'ABC'
HUMS and service date commands
