Command reference
R&S
®
ZNB/ZNBT
1456
User Manual 1173.9163.02 ─ 62
DIAGnostic:HUMS:UTILization:ACTivity:TRACking:STATe
<ID>, <State>
DIAGnostic:HUMS:UTILization:ACTivity:TRACking:STATe?
<ID>
Turns the activity tracking of utilizations on and off.
Parameters:
<State>
ON | OFF | 1 | 0
ON | 1
Tracking activity = on
OFF | 0
Tracking activity = off
Parameters for setting and query:
<ID>
ID number of the utilization activity.
To find out the ID of the utilization, you have to query the com-
plete utilization data. For more information, see
Example:
//Set activity tracking state of ID 31719936
DIAG:HUMS:UTIL:ACT:TRAC:STAT 31719936,'1'
DIAGnostic:HUMS:UTILization:CUSTom:ADD
<ID>, <Name>, <Description>,
<Unit>, <State>
Creates a custom utilization.
Setting parameters:
<ID>
Identifier of the custom utilization.
Range:
1 to 99
<Name>
Name of the custom utilization that appears in the user interface.
<Description>
Description of the custom utilization.
<Unit>
Unit of the custom utilization that appears in the user interface.
<State>
ON | OFF | 1 | 0
Initial activity state of custom utilization.
HUMS and service date commands
