GUI reference
R&S
®
ZNB/ZNBT
611
User Manual 1173.9163.02 ─ 62
Note:
The loaded file is stored in the active recall set. Persisted recall sets contain the
full (de-)embedding data so that they can be transferred to other instruments.
Remote command:
5.13.1.5
Balanced panel
This panel allows you to activate or deactivate deembedding/embedding of balanced
ports.
Access:
> "Balanced"
If the selected
is defined using one or more touchstone files, these files
can be selected from the dock widget ("...").
For network types that are defined using one or more touchstone files, the required
files can also be selected from here ("...").
If necessary, use the button on the right-hand side to open the
and change the balanced port configuration.
This panel can also be activated by selecting the
for background information, parameters and additional remote commands.
Active
The checkboxes in the "Active" column activate or deactivate the configured de-/
embeding for the related balanced port (i.e. adds or removes it to/from the calculation
flow) without changing its parameters.
Offset Embed softtool
