Command reference
R&S
®
ZNB/ZNBT
958
User Manual 1173.9163.02 ─ 62
Example:
Suppose the active recall set contains an active trace no. 1.
CALC:MARK ON; :CALC:MARK:FUNC:EXEC MAXimum
Create marker no. 1 and assign it to trace no. 1. Activate a maxi-
mum search for marker no. 1.
CALC:MARK:SEAR:TRAC ON
Enable the tracking mode for the created marker.
Manual operation:
See
CALCulate<Chn>:MARKer<Mk>[:STATe]
<Boolean>
CALCulate<Chn>:MARKer<Mk>:REFerence[:STATe]
<Boolean>
Creates or removes the related marker (see
Suffix:
<Chn>
.
Channel number used to identify the active trace
<Mk>
Marker number (ignored for reference markers)
Parameters:
<Boolean>
ON | OFF
–
creates or removes the marker.
*RST:
OFF
Example:
Suppose that the active recall set contains an active trace no. 1.
CALC:MARK ON; MARK2 ON
Create markers 1 and 2 and assign them to trace no. 1. The
default position of both markers is the center of the sweep
range.
Manual operation:
See
CALCulate<Chn>:MARKer[:STATe]:AREA
<HorizontalPos>, <VerticalPos>
Moves the marker info field for the active trace
<Chn>
to one of nine predefined posi-
tions in the active diagram.
Suffix:
<Chn>
.
Channel number used to identify the active trace
Parameters:
<HorizontalPos>
LEFT | MID | RIGHt
Horizontal position
<VerticalPos>
TOP | MID | BOTTom
Vertical position
Example:
See
Manual operation:
See
SCPI command reference
