Command reference
R&S
®
ZNB/ZNBT
971
User Manual 1173.9163.02 ─ 62
CALCulate:PARameter:DELete:ALL
Deletes all traces in all channels of the active recall set, including the default trace
Trc1
in channel 1. The manual control screen shows "No Trace".
Example:
See
CALCulate<Ch>:PARameter:DELete
Usage:
Event
Manual operation:
See
CALCulate<Ch>:PARameter:DELete:CALL
Deletes all traces in channel no.
<Ch>
.
Suffix:
<Ch>
.
Channel number
Example:
See
CALCulate<Ch>:PARameter:DELete
Usage:
Event
Manual operation:
See
CALCulate<Ch>:PARameter:DELete:CMEMory
Deletes all memory traces in channel <Ch>.
Suffix:
<Ch>
.
Channel number
Usage:
Event
CALCulate:PARameter:DELete:MEMory
Deletes all memory traces in all channels.
Usage:
Event
Manual operation:
See
CALCulate<Ch>:PARameter:DELete:SGRoup
Deletes a group of logical ports (S-parameter group), previously defined via
CALCulate<Ch>:PARameter:DEFine:SGRoup
.
Suffix:
<Ch>
.
Channel number.
<Ch>
may be used to reference a previously
defined channel. If
<Ch>
does not exist, it is generated with
default channel settings.
Example:
See
CALCulate<Ch>:PARameter:DEFine:SGRoup
Usage:
Event
SCPI command reference