displays of the set low resp. high alarm values, which on their part
again can be directly selected.
Because of the constant access to the respective opposite menu item
٭
MINMAX
٭
resp.
٭
ALARMS
٭
it is moreover possible at any time to
toggle between the MIN/MAX and ALARMS value displays.
Any action can immediately be terminated through
٭
EXIT
٭
.
6
Radio Controlled DCF77 Clock
The Radio Controlled DCF77 Clock is normally controlled by the radio
signal of the DCF77 time code transmitter and will thus set time and
date automatically. Under bad reception conditions however both can
be set manually as follows:
Setting the Time
The action is started by touching the time display in the TIME section
of the Touch Screen.
Start
٭
TIME
٭
in the menu section (last two lines on the LCD).
Set the hours and minutes. Leave the mode with
٭
EXIT
٭
or wait for
automatic time-out.
41
