background image

CP66

Installation Manual

30

Warranty Procedure - Valid in USA only

NOTICE! You must complete and return the warranty card or register your 

product online to extend the Warranty from 2 years to 3 years!

TO VALIDATE YOUR EXTENDED WARRANTY: Use the postcard that came in the box with your unit, or go to 

www.rane.com

 and click on 

New Product Registration

. Fill out the warranty completely, being sure to include the model 

and serial number of the unit since this is how warranties are tracked. If your Rane product was purchased in the U.S.A., 

mail the completed card or register online with to Rane Corporation within 10 days from the date of purchase. 

If you 

purchased the product outside the U.S.A. you must file your warranty registration with the Rane Distributor in 

that country.

 It is advised that you keep your bill of sale as proof of purchase, should any difficulties arise concerning the 

registration of the warranty card. 

NOTICE:

 IT IS NOT NECESSARY TO REGISTER IN ORDER TO RECEIVE 

RANE CORPORATION’S STANDARD TWO YEAR LIMITED WARRANTY.

WARRANTY REGISTRATION is made and tracked by MODEL AND SERIAL NUMBERS ONLY, not by the pur-

chaser’s or owner’s name. Therefore any warranty correspondence or inquires MUST include the model and serial number 

of the product in question. Be sure to fill in the model and serial number in the space provided below and keep this in a 

safe place for future reference.

WARRANTY SERVICE MUST BE PERFORMED ONLY BY AN AUTHORIZED RANE SERVICE FACILITY 

LOCATED IN THE COUNTRY WHERE THE UNIT WAS PURCHASED, OR (if product was purchased in the 

U.S.) AT THE RANE FACTORY IN THE U.S.. If the product is being sent to Rane for repair, please call the factory for 

a Return Authorization number. We recommend advance notice be given to the repair facility to avoid possible needless 

shipment in case the problem can be solved over the phone. UNAUTHORIZED SERVICE PERFORMED ON ANY 

RANE PRODUCT WILL VOID ITS EXISTING FACTORY WARRANTY.

FACTORY SERVICE: If you wish your Rane product to be serviced at the factory, it must be shipped FULLY IN-

SURED, IN THE ORIGINAL PACKING OR EQUIVALENT. This warranty will NOT cover repairs on products 

damaged through improper packaging. If possible, avoid sending products through the mail. Be sure to include in the 

package:

1.  Complete return street shipping address (P.O. Box numbers are NOT acceptable).

2.  A detailed description of any problems experienced, including the make and model numbers of any other system 

equipment.

3.  Remote power supply, if applicable.

Repaired products purchased in the U.S. will be returned  prepaid freight via the same method they were sent to Rane. 

Products purchased in the U.S., but sent to the factory from outside the U.S. MUST include return freight funds, and the 

sender is fully responsible for all customs procedures, duties, tariffs and deposits.

In order to qualify for Rane’s one year extended warranty (for a total of 3 

years parts and labor), the warranty must be completely filled out and sent to 

us immediately. Valid in USA only.

We recommend you write your serial number here in your owners 

manual and on your sales receipt for your records.

SERIAL NUMBER:______________________________________PURCHASE DATE:_____________________________

Summary of Contents for CP66

































Reviews: