background image

Manual-3

-12

-4
-8

8
4
0

+12

AUX IN

CUE

CUE

RETURN

AUX

POST

A

B

POST

A

B

CUE

A

B

CUE

LEVEL

PHONES

EQ

A

B

POST

SPLIT CUE

CUE

MASTER

CUE

LOW

HIGH

10

0

2

4

8

6

10

0

2

4

8

6

Penny & Giles Faders

•   Most respected, highest quality analog faders available:

  °   Very high performance, long life and low maintenance.

  °   Excellent Feel.

  °   Rated for 2 million cycles.

  °   Two kinds of fader caps are provided with each mixer for different preferences:

   

°   soft rubber caps for smooth mixing.

   

°   hard plastic caps for fast mixing.

•   These faders meet the requirements of the most demanding turntablist.

•   

Caution!

  °   Do not disrespect your Penny & Giles faders.

  °   Precision parts deserve proper care.

  °   Read and follow care instructions:

   

°   Do 

not 

spray any lubricant or cleaner in the fader;

   

      The resistive element is cleaned with warm water and lint free cloth.

   

°   Do 

not 

spray lubricant on the slide mechanism —

   

      Apply a drop of silicone lubricant directly on rod.

  °   When in doubt, give Rane a call: 425-355-6000.

  °   Failure to follow these simple instructions may affect the performance of the pot and will void the warranty.

    °   

See the service and replacement instructions on page Manual-7.

•   CONTOUR controls are provided for Input-1 and Input-3 faders.

  °   Allows any fader response from SLOW smooth fade to FAST cut.

•   CONTOUR control provided for the Crossfader.

  °   Allows any response from SLOW smooth blend to FAST cut.

Advanced Cue selection

•   Three position switch allows automatic “Flash-Cue” or individual Cue selection:

  °   Set switch to “A” to Cue all channels assigned to the A-side of the Crossfader.

  °   Set switch to “B” to Cue all channels assigned to the B-side of the Crossfader.

  °   Set switch to center position for manual Cue selection using individual Cue switches.

•   Individual Cue switches with green indicators are provided for:

  °   Input channel-1

  °   Input channel-2

  °   Input channel-3

  °   AUX Input

  °   FlexFX RETURN

Headphone Monitor

•   Headphone monitor source is decided by two controls:

  SPLIT CUE switch

  CUE / MASTER pan control.

•   SPLIT CUE switch “OUT”:

  CUE / MASTER control pans between stereo Cue selection and stereo Master mix.

•   SPLIT CUE switch “IN”:

 

CUE / MASTER control pans between:

 

 

mono-Cue in the left channel 

 

 

and mono-Master in the right channel.

•   Headphone LEVEL control determines the loudness.

•   Two-band Headphone EQ:

  Maximum boost: 12 dB

  Maximum cut: -12 dB

  Center frequency: 1 kHz.

•   1

/

8

" (3.5 mm) and ¼" jacks provided.

2

0

4

8

6

10

2

0

4

8

6

10

SLOW

FAST

1

CONTOUR

CROSSFADER

3

SLOW

FAST

SLOW

FAST

Summary of Contents for EMPATH









Reviews: