Manual-3
Rear Panel Description
POWER
AES3 OUT
AES3 IN
OUTPUTS
INPUTS
RPM 44
–
REMOTE INTERFACE PORT
N108
+
100-240V
55 WATTS
50/60 Hz
DEFAULT
LAN
10Base-T
LINK
MADE IN U.S.A.
RANE CORP.
+
+ –
+
–
–
+
–
+ –
+ –
+ –
+5v /
100 mA
A B +V -V
A B +V -V
(RW 485)
+12
VERSATILE OUTPUT PORT
OPEN COLLECTOR
1 2 3 4 5
7
6
8
+40 VDC / 100 mA MAX
100 mA
MAX
0-5V
GND
+12
1 2 3 4 5
7
6
8
GND
REF
1 2 3 4 5
7
6
8
GND
REF
1 2 3 4 5
7
6
8
GND
VERSATILE INPUT PORT
3
4
1
2
4
3
2
1
FOR CONTINUED
GROUNDING
PROTECTION
DO NOT REMOVE
SCREW
THIS DEVICE COMPLIES WITH PART 15
OF THE FCC RULES. OPERATION IS
SUBJECT TO THE FOLLOWING TWO
CONDITIONS:
(1) THIS DEVICE MAY NOT CAUSE
HARMFUL INTERFERENCE.
(2) THIS DEVICE MUST ACCEPT
ANY INTERFERENCE THAT
MAY CAUSE UNDESIRED OPERATION.
LISTED
COMMERCIAL
AUDIO
EQUIPMENT
24TJ
R
C
US
1
10
9
8
7
6
2
3
4
5
1
POWER IEC jack
connects to AC line voltage, 100-240 VAC ±10%.
2
Balanced analog audio Inputs 1 through 8
. Euroblock connectors.
3
Balanced analog audio Outputs 1 through 8
. Euroblock connectors.
4
AES3 digital audio Input and Output.
XLR female (input) and male (output) connectors.
5
Versatile Input Port
provides 8 logic or voltage inputs for remote level control and Preset recall. Euroblock connector.
6
Versatile Output Port
provides 8 logic outputs capable of driving small relays, LEDs or other logic inputs. Euroblock connector.
7
RW 485 Port
communicates with Rane’s Smart Remotes. A maximum of 280 mA of current is available for powering remotes.
Euroblock connector.
8
LAN and LINK
reflect the state of the Ethernet connection. LINK lights solidly when a valid connection to another Ethernet
device (e.g., a PC) is detected. LAN flashes when communicating with another Ethernet device.
9
10Base-T jack
accepts a standard Ethernet cable. RJ-45 connector.
0
DEFAULT button
recalls Preset 1 when pressed. Holding this button while applying power puts the unit into a special codeload
mode for updating firmware. The letters “CL” appear on the PRESET LED display when the device is in codeload mode.
