Manual-1
SSE 22
HOME CINEMA EQUALIZER
OPERATORS MANUAL
THX is a registered trademark of Lucasfilm Ltd.
Dolby and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation
QUICK START
Great video is easy; great audio is hard, but a SSE 22 makes it a lot easier. Read at least this boxed section and you’ll be
on your way toward great audio.
Hook-up is intuitive: In from the controller, out to the amplifiers. Just follow the silkscreened legends near the gold-
plated RCA jacks on the rear of the unit.
Familiarity with other graphic and parametric equalizers makes the SSE 22 just as familiar. If this is your first equalizer,
be gentle; it can overwhelm you.
Use the
BYPASS
switch as an aid in comparing equalized results with unequalized results. Pushbutton
in
and locked
(LED
on
) is the bypassed (unequalized) mode; pushbutton
out
(LED
off
) is the normal equalized mode. See the Operating
Instructions on the page Manual-4 for alignment information.
Install the supplied security cover after completing all settings. Be sure the
POWER
light fits snugly into the hole in the
security cover.
Never connect anything except an approved Rane power supply to the thing that looks like a red telephone jack on
the rear of the unit.
This is an AC input and requires special attention if you do not have a power supply
exactly
like the
one originally packed with your unit. See the full explanation of the power supply requirements on page Manual-3.
