10
PEQ Level
This is the amount of “boost” (increase) or
“cut” (decrease) of the mid-range parametric
equalization band:
-15.0
to
+8.0 dB
.
PEQ Frequency
(
PEQ Freq
)
This is the center frequency of the mid-
range parametric equalization band:
40 Hz
–
16 kHz
(default:
630 Hz
).
PEQ Bandwidth
(
PEQ Band
)
This is the width of the mid-range
parametric equalization band:
0.300
–
4.000
oct
(octaves) (default:
0.500 oct
).
High Shelf Level
(
HS Level
)
This is the amount of “boost” (increase) or
“cut” (decrease) of the high-frequency
shelving filter:
-15.0
to
+8.0 dB
.
High Shelf Frequency
(
HS Freq
)
This is the center frequency of the high-
frequency shelving filter:
630 Hz
–
16 kHz
(default:
630 Hz
).
Page Enable
(
PG Enable
)
This feature determines whether or not the
zone will receive an audio signal from the
pager:
Enabled
(on),
Disabled
(off).
Tip
: Lower values allow you to boost treble
frequencies more but increases the risk of
overdriving the tweeters.
Note
: If this feature is on, remember to set
the
Output Paging Level
, which is
independent of the normal Zone Output
Level.
Page Level
(
PG Level
)
This is the output volume level of the pager:
-30.0
to
+12.0 dB
(default:
0.0 dB
).
Page Ducker Depth
(
PG Duck
)
This determines how much the pager, when
activated, will attenuate the normal output
signal:
0.0
to
-85.0 dB
(default:
-12.0 dB
).
Tip
: Setting this to
-85.0 dB
will completely
mute the normal output signal when the
pager is on.
Summary of Contents for Zonetech
Page 1: ...UserGuide English 3 25 Appendix English 26 27...
Page 2: ...2...
Page 28: ...rane com Manual Version 1 0...
