9
ELECTRONIC CLOCK
(fig. 3.2)
The programmer is equipped with an
electronic clock with lighted numbers
which indicate hours and minutes.
Upon immediate connection of the oven
or after a blackout, three zeroes will
flash on the programmer panel.
To set the hour it is necessary to push
the
button and then the
or
button until you have set the exact hour
(fig. 3.2).
Alternatively, simultaneously push the
two buttons and at the same
time push the
or
button.
Note: Setting the clock deletes any
programme.
ELECTRONIC TIMER
The timer programme consists only of a
buzzer which may be set for a maximum
period of 23 hours and 59 minutes.
If the
AUTO
is flashing push the
button.
To set the time, push the
button and
the
or
until you obtain the
desired time (fig. 3.4).
Having finished the setting, the normal
time will appear on the panel and the
symbol will appear.
The countdown will start immediately and
may be seen at any moment on the panel
by simply pressing the button
.
At the end of the time, the
symbol
will be switched off and an intermittent
buzzer will go off; this can be stopped
by pressing any one of the buttons.
ALTERING THE AUDIBLE SIGNAL
By pressing the
button you can
choose from three variations.
NORMAL COOKING WITHOUT THE
USE OF THE PROGRAMMER
To manually use the oven, that is, without
the aid of the programmer, it is necessary
to cancel the flashing
AUTO
by pushing
the button
(
AUTO
will be switched off
and the symbol
will go on - Fig. 3.3).
Attention:
If the
AUTO
is not flashing
(which means a cooking programme has
already been inserted), by pushing the but-
ton
you have cancelled the programme
and switched to manual
.
Fig. 3.4
Fig. 3.3
