Rangemaster 58580, Installation Instructions Manual

8

INSTALLATION

WARNINGS: 
Remember that the gas inlet union on the
appliance is a 1/2” gas parallel male type in
compliance with ISO 228-1 standards. The
installer must ensure that the gas supply pipe
is never able to touch moveable parts of the
built-in cabinet (e.g. drawers). Furthermore, it
must not pass through compartments that
could be used for storage purposes. When
using a flexible hose, it is essential to comply
with the following instructions: 
- No part of the pipe must be able to touch

parts the temperature of which exceeds
75ºC

- The pipe must not be pulled or twisted,

throttled or tightly bent. 

- It must not come into contact with sharp

edges or corners. 

- It must be easy to inspect the entire pipe

length in order to check its state of wear. 

- The pipe must be replaced within the date

stamped on the pipe itself. 

- The appliance complies with the provisions

of the following EEC Directives: 
90/396 + 93/68 regarding gas safety. 

- Flexible hoses for LP Gas should be suitable

for LPG, capable of 50 mbar pressure, 70°C
temperature rise and carry a red stripe,
band or label. If in doubt contact, your
supplier.