background image

5

The 100 gas cooker (Fig. 2.1) has the following features:

A. 

5 hotplate burners including a wok burner

B. 

A control panel incorporating a timer

C. 

A glide-out grill

D. 

Main oven (timed)

E. 

Tall fan oven

Hotplate Burners

The drawing by each of the central knobs indicates which 

burner that knob controls.
Each burner has a Flame Supervision Device (FSD) that 

prevents the flow of gas if the flame goes out.
When the igniter button is pressed in, sparks will be 

made at every burner – this is normal. Do not attempt to 

disassemble or clean around any burner while another 

burner is on, otherwise an electric shock could result.
To light a burner, press the igniter button, and push in and 

turn the associated control knob to the high position as 

indicated by the large flame symbol (

), (Fig. 2.2).

The igniter should spark and light the gas. Keep holding the 

knob pressed in to let the gas through to the burner for about 

ten seconds.

ArtNo.210-0013 - 90DF - Classic anno lidded

S

S

1

1

2

2

3

3

4

4

5

5

6

6

7

7

8

8

9

9

0

M

H

G

A

B

C

D

E

Fig. 2.1 

Fig. 2.2 

2.  Cooker Overview

Summary of Contents for Classic 100 Gas













































Reviews: