Rangemaster Classic 110, Installation And User Manual

13

To set the correct time of day.

See the ‘2 Minute Tour’ at the beginning of this
guide.

To time something that’s cooking
(minute minder)

Press and hold as above. At the same time press
(-) or (+) until the time you want to cook for is
shown, as below.

You can check time remaining by pressing 
and cancel the beeper by pressing 

To stop automatically

Use when you have started the oven manually.

Press and hold as above. At the same time press
(-) or (+) until your required ‘Stop Time’ shows.
AUTO will show in the display. When your
cooking is finished the beeper sounds. TURN

THE OVEN KNOB TO 0 FIRST, then press 

once to stop the beep, press   again to return to
manual cooking.

The clock

To start and stop the oven automatically

Before you set the clock, you must have two
numbers clearly in mind.

The ‘cook period’, which is the period of time
you want the oven to cook.

The ‘stop time’, which is the time of day you
want the oven to stop cooking.

You cannot set a start time directly - this is set
automatically by setting the cooking period and
stop time.

Press and hold as above. At the same time
press (-) or (+) until your required ‘cook period’
shows.

Then press and hold as above. At the same
time press (-) or (+) until your required ‘stop
time’ shows.
AUTO will show in the display.
Set the oven to the required temperature.
When your cooking is finished the beeper
sounds. TURN THE OVEN KNOB TO 0 FIRST,

then press 

 once to stop the beep, press 

again to return to manual cooking.

If you are out, don’t worry about the beeper
going off, it stops after a while. When you
return, TURN THE OVEN KNOB TO 0 FIRST,

then press 

 twice, to return to manual

cooking.

AUTO is showing, you want to reset to
manual cooking.

When cancelling an automatic setting, any
cooking time already set must be returned to
0.00 before you can return to manual, by

pressing the 

 button.