INSTALLATION
Check the appliance is electrically safe when you have finished.
33
ArtNo.350-0010 - Fitting the plinth 1 (Kitchener)
Art No 215-0028 - Handrail fascia fixings
ArtNo.215-0026 - Handle gaskets fixed
ArtNo.215-0027 - Elan handle blanking plugs
Final Checks
Hob Check
Check each cooking zone in turn. Be sure to use pans of the
correct size and material.
Grill Check
Turn on the grill control and check that the grill heats up.
Oven Check
Set the clock as described earlier, and then turn on the ovens.
Check the oven fans start to turn and that the ovens heat up.
Final Fitting
Fitting the Handles and Handrail
Remove the 4 mm Allen screws from the doors (
). Fit
the door handles and secure using the 4 mm screws.
n
The handles should be above the fixings.
Fit the plastic blanking plugs to the fixing holes (
Remove the 4 mm Allen screws from the top corners of the
). Fit the front handrail in position and secure
using the 4 mm screws.
Fitting the 2-piece Plinth
Fit the inner plinth to the bottom front of the cooker using
the 4 screws provided (
Fit the outer plinth (2 screws, 1 each end) to the inner plinth.
The height of the outer plinth can be adjusted by sliding it up
or down via the slotted hole (
).
Fitting the Splashback
(optional)
Position the splashback on the rear of the hotplate and secure
with the screws supplied.
Customer Care
Installer
: Please complete your details in this guide, inform
the user how to operate the cooker and hand over the
instructions.
Thank you.
Fig. 9.13
Fig. 9.14
Fig. 9.15
Fig. 9.16
ArtNo.350-0011 - Fitting the plinth 2 (Kitchener)
Outer plinth
Outer plinth fixing screw
Inner plinth
Fig. 9.17
Summary of Contents for Elan Deluxe 90
