Rangemaster ELAS90EC, User'S Manual & Installation Instructions

12

The 6-button Clock

Setting the time of day

The 6-button LCD clock is shown in Fig.2-31. When the 

clock is first connected the display flashes ( 

0.00 

) and (

G

) 

alternately.
Press and hold both the [

C

] and [

D

] buttons down  

(Fig.2-32). Now press the [+] button 

(or the [–] button)

 until 

the correct time shows. 
Do not forget that it is a 24-hour clock.
If you need to reset the cooker, turn off the power supply and 

wait for a couple of minutes and start again.

Setting the minute minder

Press and hold the [

C

] button (Fig.2-33), and then press the 

[+] button until the length of time you want to cook for is 

shown (Fig.2-34).
You can check the time remaining by pressing [

C

]. When the 

beeper sounds cancel it by pressing [

C

].

• 

The 

‘cook period’

, which is the length of time you 

want the oven to cook for.

• 

The 

‘stop time’

, which is the time of day you want the 

oven to stop cooking.

To stop the oven automatically

Press and hold the Stop Time [

E

] button (Fig.2-35) and then 

press the [+] button 

(or [–] button)

 until the required 

‘stop 

time’

 shows (Fig.2-36). AUTO will show in the display.

Once the 

‘stop time’

 is reached, the beeper sounds. To stop the 

beep turn the oven control knob to 0 first and then press [

B

] 

once; press [

B

] again to return to manual cooking.

To start and stop the oven automatically

Before you set the clock you must have two numbers clearly 

in mind – the 

‘cook period’

 and the 

‘stop time’

.

Note: You cannot set a start time directly – this is set 

automatically by setting the 

‘cook period’

 and the 

‘stop time’

.

Press and hold the [

D

] button (Fig.2-37) and then press the 

[+] button 

(or [–] button) 

until the required 

‘cook period’

 shows 

(Fig.2-38).
Now press and hold the [

E

] button (Fig.2-39) and then press 

the [+] button 

(or [–] button) 

until the required 

‘stop time’

shows (Fig.2-40). Release the buttons.
AUTO will now show in the display.
Set the oven to the required temperature. When cooking is 

finished the beeper will sound. Turn the oven knob to the OFF 

position first, and then press the [

B

] button once to stop the 

beep; press it again to return to manual cooking.
If you are out, do not worry about the beeper going off, it 

stops after a while. When you return, turn the oven knob to 0 

first, and then press [

B

] twice to return to manual cooking.

ArtNo.302-0001 - 6-button clock

ArtNo.302-0003 - 6BC

minute minder setting 1

ArtNo.302-0004 - 

Minute minder setting 2

ArtNo.302-0005 - 

6BC Stopping the oven 1

Fig.2-32

Fig.2-33

Fig.2-34

Fig.2-35

ArtNo.302-0002 - 6BC annotated

A

B

C

D

E

F

Fig.2-31

A – Minute minder,  B – ‘Cook’ time,  C – ‘Stop’ time, 

D – Manual,  E & F – Time setting buttons

ArtNo.302-0005a - 

6BC Stopping the oven 1a

Fig.2-36

ArtNo.302-0006 - 6BC

setting the cook time

Fig.2-37

ArtNo.302-0006 - 6BC

setting the cook time

Fig.2-38

ArtNo.302-0005 - 

6BC Stopping the oven 1

Fig.2-39

ArtNo.302-0005a - 

6BC Stopping the oven 1a

Fig.2-40