13
C
A
B
C
A
B
To Start and Stop the Oven Automatically
The timer allows you to automatically start and stop by a
combination of the length of the cooking time and the stop
time. Giving you the flexibility to cook casseroles etc while
you are out. You cannot set the actual start time.
1.
Turn the
Timer (A)
knob to the
Cook Time (F)
setting.
Turn the
Adjusting (B)
knob clockwise to set the length
of the cooking time required
(Fig. 3.9)
.
2.
Turn the
Timer (A)
knob to the
Stop Time (G)
setting
(Fig. 3.10)
. The display will show the current time of day
plus the ‘cook time’ you just set.
3.
Turn the
Adjusting (B)
knob to set the time of day you
want the oven to stop cooking
(Fig. 3.11)
.
4.
Set the oven to the required cooking temperature and
function mode.
5.
Turn the
Timer (A)
knob to the
Auto (H)
setting
(Fig. 3.12)
. If the display shows the current time and the
word
‘AUTO’
the oven is set to turn on and off.
6.
When the program starts the oven, the cooking symbol
will appear on the display. Once the specified time has
elapsed it will emit an alarm and the Multifunction Oven
will stop working. The ‘Cooking’ symbol on the display will
disappear and the word
‘AUTO’
will flash
(Fig. 3.13)
.
7.
Once the specified time has elapsed it will emit an alarm.
There are two ways to cancel the alarm, refer to
“Cancel
the Timer Alarm” on page 11
•
The
‘cook period’
, which is the length of time you
want the oven to cook for.
•
The
‘stop time’
, which is the time of day you want the
oven to stop cooking.
Reset to Manual Cooking
To cancel any automatic settings turn the
Timer (A)
knob to
the
Manual (D)
setting and release
(Fig. 3.14)
.
Note:
Whilst this operation cancels all automatic program
settings, it does not cancel the minute minder.
Beeper Tone Adjustment
The beeper tone can be adjusted to three different levels.
Turn the
Timer (A)
knob to the
Clock (C)
setting. Turn the
Adjusting (B)
knob counter clockwise until the tone bars are
displayed
(Fig. 3.15)
.
To adjust the tone of the alarm, release the
Adjusting (B)
knob and then turn counter clockwise again
(Fig. 3.16)
. The
tone of the alarm will change. Repeat these steps until the
desired alarm tone is set.
A
B
D
A
B
A
B
G
A
B
F
A
B
Fig. 3.9
Fig. 3.10
Fig. 3.11
H
A
B
Fig. 3.12
Fig. 3.13
Fig. 3.14
Fig. 3.15
Fig. 3.16
