background image

24

Dear  Installer

Before you start your installation, please complete 
the details BELOW.
If your customer has a problem relating to your 
installation they will be able to contact you easily.
Thank you

Installer’s Name

Installer’s Company

Installer’s Telephone number

You  will  need  the  following 

equipment  to  complete  the  cooker 

installation  satisfactorily

STABILITY BRACKET

If the cooker is to be 

supplied with gas through 

a flexible hose, a stability 

bracket or chain must be 

fitted.

These are not supplied 

by with the cooker 

but 

are available at most 

builders merchants.

GAS PRESSURE 

TESTER

It is important the gas 

pressure is set correctly

FLEXIBLE GAS HOSE 

Must be in accordance 

with the relevant 

standards. For LP Gas 

it should be suitable 

for LPG, capable of 

50mbar pressure, 70°C 

temperature rise and carry 

a red stripe, band or label.

A hose is not supplied 

by with the cooker.

MULTIMETER

(for electrical checks)

Make sure the installation 

is electrially safe.

You  will  also  need  the  following 

tools:

1.  Electric  drill

2.  Masonry  drill  bit  &  Rawlplugs

(only required if fitting the cooker on a stone or 

concrete floor)

3.  Steel  tape  measure

4.  Cross  head  screwdriver

5.  Flat  head  screwdriver

6.  Spirit  level

7.  Pencil

8.  Adjustable  spanner

9.  Screws  for  fitting  stability  bracket

Summary of Contents for Professional 90 Gas FSD







































Reviews: