19
Checking the Parts:
Location of Cooker
The cooker may be installed in a kitchen/kitchen diner but
NOT in a room containing a bath or shower.
This appliance is designed for domestic cooking only. Use
for any other purpose could invalidate any warranty or
liability claim.
Note:
An appliance for use on LPG must not be installed
in a room or internal space below ground level, e.g. in a
basement.
Conversion
This appliance is supplied set for G20 20 mbar Cat II 2H3+.
A conversion kit for another gas is included with the cooker.
If the appliance is to be converted to another gas we
recommend that this is carried out before installation. See the
instructions that are supplied with the conversion kit.
After converting the appliance, please attach the Gas
Conversion sticker over the appropriate area of the data
badge – this will identify the gas type for which the appliance
is now set.
You will need the following equipment to complete the
cooker installation satisfactorily:
•
Stability bracket: If the cooker is to be supplied with gas
through a flexible hose, a stability bracket or chain must
be fitted.
These are not supplied by with the cooker
but are
available at most builders’ merchants.
•
Gas pressure tester/manometer
•
Flexible gas hose: Must be in accordance with the
relevant standards.
•
Multimeter: For electrical checks
You will also need the following tools:
1.
Electric drill
2.
Masonry drill bit (only required if fitting the cooker on a
stone or concrete floor)
3.
Wall plugs (only required if fitting the cooker on a stone
or concrete floor)
4.
Steel tape measure
5.
Cross head screwdriver
6.
Flat head screwdriver
7.
Spirit level
8.
Pencil
9.
Adjustable spanner
10. Screws for fitting stability bracket
11. 4mm & 3mm Allen keys
Levelling tool and Allen keys
3 pan supports
ArtNo.000-0002 Classic tools
ArtNo.000-0001 90 Pan supports
Griddle
Wok stand
ArtNo.000-0008 Griddle
ArtNo.000-0009 Wok ring, cast
Grill pan & trivet
1 flat shelf
ArtNo.330-0001 - Grill pan
ArtNo.326-0002 - Energy saving shelf
1 drop shelf
Roasting tin
ArtNo.324-0011 Flat & drop shelves
ArtNo.324-0004 Roasting tin
Handyrack
Tall oven shelves and shelf
supports
ArtNo.324-0003 Handyrack
ArtNo.000-0010 Tall oven shelves
Summary of Contents for Professional+
Page 30: ...28 ...
Page 31: ...29 ...
Page 32: ... www rangemaster co uk ArtNo 000 0003 CE logo DocNo 000 0001 Back cover Rangemaster ...