Rangemaster RBC38, Installation, Operation And Maintenance Instructions

RBC38 BEVERAGE CENTRE FEATURES

9

Insert Wine Bottles

The wine rack pull-out shelf holds four (4) bottles.  See Fig-
ure 4 for typical wine bottle orientation.  

Loading Tips and Suggestions

The wine rack can be located at any shelf support but it is 
recommended it be located toward the uppermost position 
in the cabinet. The utility shelves can be located at any posi-
tion depending on bottle size. See Figure 5. 

Keep wines that you plan to use for everyday drinking and 
entertaining on the front half of the racks where labels are 
completely visible.  Place wines for aging or longer term 
storing in the rear.

Pull-out Racks

The pull-out wine rack may be pulled out approximately 
160 millimeters to facilitate adding or removing bottles.  Do 
NOT lean on or press down heavily on the wine shelf.  Do-
ing so may damage the shelf and the wine bottles stored on 
it.  Pull the wine rack out gently and carefully to minimize 
unsettling your wine collection.  AVOID pulling out more 
than one rack at any time to maintain stability.

Single Bottle Racks

Since bottles are not stacked on top of each other, you can 
easily view and access your inventory without disturbing 
other bottles.

Front Bottles (Necks Facing Rear)

Rear Bottles (Necks Facing Front)

Figure 4

Figure 5