Rangemaster RG60, User Manual & Installation & Service Instructions

3

ArtNo.311-0001 Right pans gas

The diagram by each of the control knobs indicates which 
burner that knob operates (Fig.2-1). Each burner has a 
special Flame Safety Device (FSD) that stops the flow of gas if 
the flame goes out.

To light a burner, push in and turn the associated control 
knob anti-clockwise (Fig.2-2) to the ‘high’ position indicated 
by the large flame symbol [



]. Keep the knob pressed down 

for 3-5 seconds to let the gas through to the burner. The 
igniter should spark and light the gas.

If, when you let go of the control knob the burner goes out, 
then the safety device has not held in. Turn the control to the 
off position and wait one minute then try again, this time 
holding in the control knob for slightly longer.

Adjust the flame to suit by turning the control knob clockwise 
(Fig.2-3).

Ensure that the flames are under the pans. Using a lid will 
help the contents boil more quickly (Fig.2-4).

Large pans should be spaced well apart.

2.  Hob Overview

ArtNo.316-0008 RG70 hob iso

ArtNo.316-0002 RG60 control to high

ArtNo.316-0003 RG60 Control to low

Fig.2-2

Fig.2-1

Fig.2-3

Fig.2-4

DocNo.021-0001 - Overview RG60 gas