- 5 -
1. SELECT BLOWER OPTION
AND INSTALL DUCTWORK
Either an interior or exterior blower may be used with this hood.
The RM60000 Series hood must be installed with blower models
RM325H, RM326H, 331H, 332H, 335 or 336 only. Other blowers
cannot be substituted. (Blowers sold separately).
NOTES:1. The 331H, 332H, 335 or 336 exterior blower MUST
BE installed with the rough-in kit model 332KR (sold
separately).
2. In addition to the blower models listed above, this hood
is also compatible with older internal blower versions
325H and 326H. However, discard the installation
instructions included with those blowers and contact
our technical suppport to obtain replacement instruction.
Plan where and how the ductwork will be located.
Install proper-sized ductwork, transition(s), elbow(s), and roof or
wall cap for the type of blower you are using.
EXTERIOR BLOWER
EXTERIOR
BLOWER
HOOD
DECORATIVE
FLUE
or SOFFIT
HH0026A
12"
(305 mm)
24" TO 30" (609 to 762 mm)
ABOVE COOKING SURFACE
332KR
ROUGH-IN KIT
(see page 4)
10" (254 mm)
ROUND DUCT
10" (254 mm)
ROUND ELBOW
10" (254 mm)
ROUND DUCT
ROOF CAP
WALL CAP
HOOD
DECORATIVE
FLUE
or SOFFIT
4-1/2" x 18-1/2"
to 10"
(114 x 470 to
254 mm) ROUND
TRANSITION
(see page 4)
HH0025A
12"
(305 mm)
24" TO 30" (609 to 762 mm)
ABOVE COOKING SURFACE
MODEL RM325H SINGLE BLOWER
TYPICAL DUCTWORK
MODEL RM326H DUAL BLOWER
TYPICAL DUCTWORK
MODEL 331H, 332H, 335 OR 336 EXT.
BLOWER TYPICAL DUCTWORK
7" (178 mm)
ROUND DUCT
ROOF CAP
7" (178 mm)
ROUND
ELBOW
24" TO 30" (609 to 762 mm)
ABOVE COOKING SURFACE
WALL CAP
HOOD
DECORATIVE
FLUE
or SOFFIT
12"
(305 mm)
HH0024A
2. MEASURE INSTALLATION
Dimensions for the most common installations are shown
below.
Adjust your measurements for various heights of ceilings, soffits,
cabinets or cooktops.
For proper operation, the hood must be a
minimum of 24" and a maximum of 30" above the cooktop.
18"
(457 mm)
Standard 18"
(457 mm) H
over-cooktop
cabinet
24"
(610 mm)
Cooktop
19"
(483 mm)
Top of wood
mounting strip
Hood
RMP Series
Backsplash
(optional)
Standard
8 ft. (2.44 m)
ceiling
Standard 36"
(914 mm)
H cooktop
HH0028A
INSTALLATION WITH STANDARD 18’’ HIGH
OVER-COOKTOP CABINET
INSTALLATION WITH 12’’ SOFFIT OR
OPTIONAL SOFFIT CHIMNEY RMN SERIES
Maximum distance
between the hood
and the cooktop
Minimum distance
between the hood
and the cooktop
