14
ArtNo.600-0034 - Clearances
15mm
15
450
All dimensions in mm
590
400
15
Toe
moulding
(Doors omitted for clarity)
Fig.4-1
Fig.4-2
Fig.4-3
Positioning Your Appliance
Choosing the Right Location
This appliance should be installed in a room that is dry
and well ventilated. To provide adequate ventilation, make
sure the refrigerator is at least 15 mm clear on all sides
from kitchen cabinetry (Fig.4-1). Any units placed above
the appliance must be clear by 15 mm to allow sufficient
ventilation.
If locating the refrigerator close to a corner, sufficient spacing
must be left for opening the doors and removing the shelves
(Fig.4-2).
This appliance should be at least 100 mm from any electric or
gas cooker and 300 mm from any coal or oil stove. If this is not
possible, make sure that appropriate insulation is used.
Avoid exposing the appliance to direct sunlight, and sources
of heat (such as radiators, heaters or cookers).
If this appliance is situated in a cold environment (such as
a shed, outhouse or garage) it will affect its performance.
You may find that the performance of the appliance is not
consistent and this may damage foods. A consistent ambient
temperature of 10 °C or above is recommended.
4. Installation
Summary of Contents for SxS 663
Page 1: ...SxS 663 Refrigerator User Guide Installation Service Instructions U110221 01D ...
Page 26: ...26 ...
Page 27: ...27 ...