For technical support, contact us at 1-800-565-5321
62-U5074 Installation Guide
| REV. A1 | Page
6
PHASE 2 –
INSTALL
2.1 PARTSKEEPER CARRY CASE INSTALLATION
TOOLS
q
Cordless Impact
q
3/8" Bit
#92-102 Screw #14 × 1"
HARDWARE USED
4×
96-5015
2.1.1
•
Lift the assembled partskeeper carry base to the vehicle, then put it in place.
• Screw the assembled partskeeper carry base to the floor vehicle.
2.1.2
•
Rivet the partskeeper holder to the partskeeper carry base.
• After riveting the partskeeper holder slide the partskeeper case inside the partskeeper holder.
NOTE:
Rivet from inside not from outside.
#96-202 Closed Rivet
HARDWARE USED
4×
96-5015
TOOLS
q
Rivet Gun
