For technical support, contact us at 1-800-565-5321
6255 Installation Guide
| REV. A1 | Page
4
q
2.2
Install Seat Bottom Cover.
UNDER
q
Ensure the tag inside the cover corresponds
with the seat you are working on.
Each cover will have a Driver or Passenger tag.
q
Place seat bottom cover over bottom of seat.
q
Push flap on top of cover between seat back
and seat bottom.
q
Tuck sides of cover behind plastic trim.
q
Push strings between seat bottom and plastic trim.
They will go through where the seat back and
bottom meet. Strings must go UNDER round bar that runs
through seat bottom.
q
Pull strings behind seat and pull tight.
q
Tie a loop in one string, close to the edge of the
seat.
q
Run the other string through the loop and pull as tight as
possible. This is what keeps your seat bottom from shifting.
q
Pull bottom flaps from front of seat bottom and
attach to top flap.
q
Flaps MUST run OVER bars and brackets under seat.
Seat cover bottom flap, running OVER all bars,
