For technical support, contact us at 1-800-565-5321
7209 Installation Guide
| REV. C1 | Page
13
Drill all the marks then, attach plus nuts to the
holes.
HARDWARE USED
4×
#94-130 Plus Nut .250
TOOLS
q
Cordless Drill
q
3/8" Drill Bit
q
Plus Nut Tool
WARNING:
Before drilling, ensure that you will not hit any critical parts of the vehicle like the
Gas tank
,
Wiring Harness
and
Hose
.
2.3.2
• Lift the assembled workbench on the side.
• Drill all the marks using 3/8" drill bit, then attach plus nuts to the holes.
NOTE:
If the vehicle has a floor, drill the floor using 1" hole saw, then drill the vehicle floor using 3/8" drill bit.
