For technical support, contact us at 1-800-565-5321
P4-RS60-3 Installation Guide | REV. B2 | Page 10
PLUSNUT
PHASE 2 – INSTALLATION
2.4 ATTACH PLUS NUTS
WARNING: Before drilling, ensure that you will not hit any critical parts of the vehicle like the Gas tank,
Wiring Harness and Hose.
NOTE: Use 1/2" drill bit with drill collar to stop drill at 1/2" depth.
2.4.1 • Lift the assembled shelf on the side.
• Drill all the marks using 1/2" drill bit w/ drill collar, then attach plus nuts to the holes.
Drill all the marks then, attach plus nuts to the
holes.
HARDWARE USED
8×
#94-132 Plus Nut
DRILL COLLAR
(
set
at
1/2
"
)
TOOLS
q
Cordless Drill
q
1/2" Drill Bit w/ Drill Collar ( Set at 1/2" )
q
Plus Nut Tool ( 5/16" )
