Ranger Products Professional RFJ-3TP, Installation And Operation Manual

3

serial number (if exists) and the reason for the return. 

In addition to the RMA number, a completed RMA form 

must accompany each shipment of returned  

merchandise.

No returns of any type will be accepted without an RMA 

number and completed RMA form.

Returned items must be shipped via ground service only.

Do not return items by air unless authorized in writing. 

For warranty related exchanges and/or returns, a 

BendPak customer service representative will work 

with you to arrange to have the item(s) returned via a 

BendPak preferred carrier freight collect.

Products returned C.O.D. will be refused. Unauthorized 

freight collect charges will be denied.

Once an item arrives at BendPak / Ranger, we will issue 

a full or partial credit, exchange or refund within 15 days.

Additional time may be required depending on the nature 

of the return.

Returns must be made within 15 days of the Return 

Authorization being provided. Any incurred costs  

associated with damaged merchandise will be deducted 

from credits owed. BendPak / Ranger is not responsible 

for merchandise damaged in return shipment. We  

strongly recommend you package the items carefully to 

ensure safe passage. For non-warranty items, we  

suggest you fully insure your return shipment in case of 

loss or damage.

IMPORTANT SAFETY TIPS

THIS OPERATING MANUAL CONTAINS 

IMPORTANT DETAILS CONCERNING THE SAFE 

OPERATION OF THIS FLOOR JACK. THE USER MUST 

READ AND UNDERSTAND THESE DETAILS BEFORE 

ANY USE OF THE FLOOR JACK. THIS MANUAL 

MUST BE RETAINED FOR FUTURE REFERENCE. 

OWNER/OPERATOR 

RESPONSIBILITY:

The owner and/or the operator shall study the product 

instructions and retain them for future reference. 

The owner and/or operator shall have an understanding 

of the product operating instructions and warnings before 

operating the jack. 

Warning information shall be emphasized and under-

stood. If the operator is not fluent in English, the product 

instructions and warnings shall be read to and discussed 

with the operator in the operator’s native language by the 

purchaser/ owner or his designee, making sure that the 

operator comprehends its contents. 

INSPECTION

Visual inspection should be made before each use of the 

jack. This inspection should check for abnormal  

conditions such as cracked welds, leaks and damaged, 

loose or missing parts. 

Any jack that appears to be damaged in any way, is found 

to be worn or operated abnormally, must be removed 

from service immediately.

Any jack that operates abnormally shall be removed from 

service until repaired by a qualified repair service center. 

If the jack is accidentally subjected to an abnormal load 

or shock, it must be taken out of service immediately and 

be inspected by a qualified repair or service center. 

It is recommended that an annual inspection is performed 

on the jack and that any damaged or worn parts, decals 

or warning labels be replaced with manufacturer’s  

specified parts. 

ALTERATIONS 

   Because of potential hazards associated with this type      

   of equipment, no alterations shall be made to the 

   product. 

FOR YOUR SAFETY AND TO PREVENT INJURY: 

Use Service Jack for lifting purposes ONLY. Make sure to 

always support vehicle with jack stands. 

ALWAYS MAINTAIN A CLEAN WORK AREA. 

KEEP VISITORS AND ESPECIALLY

CHILDREN AWAY FROM WORK AREA.

THIS FLOOR JACK IS TO BE OPERATED BY 

PROPERLY TRAINED PERSONNEL ONLY. 

OPERATION BY UNTRAINED PERSONNEL MAY 

RESULT IN INJURY AND/OR PROPERTY DAMAGE.