5
IMPORTANT SAFETY INSTRUCTIONS
Read these safety instructions entirely. Do not attempt to install this QuickJack if you have never been trained
on basic vehicle jack installation procedures. Never attempt to lift components without proper lifting tools such as
forklifts or cranes. Stay clear of any moving parts that may fall and cause injury. When using your garage equipment,
basic safety precautions should always be followed, including the following:
1. Read and understand all instructions and all safety
warnings before operating jack.
2. Care must be taken as burns can occur from touching
hot parts.
3.
DO NOT
operate equipment with a damaged cord or
hose or if the equipment has been dropped or damaged
until it has been examined by a qualified service person.
4.
DO NOT
let a cord hang over the edge of the table,
bench, or counter or come in contact with hot manifolds or
moving fan blades.
5. Care should be taken to arrange the cord and hose so
that it will not be tripped over or pulled.
6. Adequate ventilation should be provided when
working on operating internal combustion engines.
7. Keep hair, loose clothing, fingers, and all parts of body
away from moving parts. Keep feet clear of jack when
lowering. Avoid pinch points.
8. Use only as described in this manual. Use only manu-
facturer’s recommended attachments.
9.
ALWAYS WEAR SAFETY GLASSES
. Everyday
eyeglasses only have impact resistant lenses, they are not
safety glasses.
10. Consider work environment. Keep work area clean.
Cluttered work areas invite injuries. Keep areas well lit.
11. Only trained operators should operate this jack. All
non-trained personnel should be kept away from the work
area. Never let non-trained personnel come in contact
with, or operate jack.
12. Clear area if vehicle is in danger of falling.
13.
ALWAYS
make sure the safeties are engaged before
attempting to work on or near a vehicle.
14.
MAINTAIN WITH CARE
. Keep jack clean for better
and safer performance. Follow manual for proper
lubrication and maintenance instructions. Keep control
handles and/or buttons dry, clean and free from grease
and oil.
15. Check for damaged parts. Check for alignment of
moving parts, breakage of parts or any condition that may
affect operation of jack. Do not use jack if any component
is broken or damaged.
16.
NEVER
remove safety related components from the
jack. Do not use jack if safety related components are
missing or damaged.
17.
STAY ALERT
. Use common sense and watch what
you are doing. Remember,
SAFETY FIRST
.
SAVE THESE INSTRUCTIONS IN AN ACCESSIBLE LOCATION
IMPORTANT
SAFETY INSTRUCTIONS
QUICKJACK
™
By Ranger Products
