SPECIFICATIONS / FEATURES
HOME / HOBBY
Models: R28H / R2513H / R326H-601
Model
Motor
Max PSI/BAR Max CFM @
90PSI/LM
Max CFM @
115PSI/LM
Tank
Dimentions
Ship
Weight
R28H
2hp / 50-60Hz /
110V
115PSI
8 BAR
7.3 CFM
207 LM
7 CFM
198 LM
8 Gal
30 L
W13-3/8"xL23-3/4"xH25-3/4"
W340mm x L603mm x H654mm
63 Lbs
29 Kg
R2513H
2.5hp / 50-60Hz /
110V
115PSI
8 BAR
8.8 CFM
249 LM
8.5 CFM
241
LM
13 Gal
50 L
W15-1/4"xL27"xH25-3/4"
W387mm x L686mm x H654mm
69 Lbs
31 Kg
R326H-601
3 hp / 60Hz* /
110V
145PSI
10
BAR
8.7 CFM
246 LM
8.3 CFM
235
LM
26 Gal
100 L
W18"xL43-1/4"xH37"
W457mm x L1099mm x H940mm
216 Lbs
98 Kg
* 50 hz model available upon request
ASSEMBLY INSTRUCTION
There is no assembly required. This compressor is completely pre-assembled at the factory.
Installation and Location:
Locate the compressor in a clean, dry and well ventilated area. The compressor should be located 12” to 18” from a
wall or any other obstruction that would interfere with the air flow through the fanbladed belt-wheel. Place the com-
pressor on a firm, level surface. The compressor is designed with heat dissipation fins which allow for proper cooling.
Keep the fins and other parts that collect dust and dirt clean. A clean compressor runs cooler and provides longer
service. Do not place rags, containers or other materials on top of the compressor which would obstruct ventilation
openings for proper compressor operating temperature.
For Vertical Type Only:
For permanent installation, the compressor should be bolted to the floor through holes pro-
vided in the compressor feet. Shims must be used to level the compressor before bolting it to the floor. Severe vibra-
tion will result when the compressor is bolted down tightly and the feet are not level. This can lead to welds cracking
or fatigue failure of the air receiver.
