5
PROBLEM
ACTION
1. Unit will not lift load
Purge air from hydraulic system by following procedure un-
der OPERATING INSTRUCTIONS.
2. Unit will not sustain load or feels “spongy” under load. Purge air from hydraulic system as above.
3. Unit will not lift to full height.
Purge air from hydraulic system as above. Check to be sure
oil level is not too high or low.
4. Unit will not lower completely.
Check oil level. Make sure not overfilled.
5. Handle tends to raise up while the unit is under load.
Pump the handle rapidly several times to push oil past ball
valves in power unit.
6. Unit still does not operate.
Contact Parts & Warranty Department.
SPECIFICATIONS
TROUBLESHOOTING
Maximum Capacity
3,000 lbs / 1,361 kg.
Maximum Saddle Height
24” / 610mm
Minimum Saddle Height
2.75” / 70mm
Frame Height
6.5” /165mm
Real Wheel Diameter
2.25 / 57mm
Front Wheel Diameter
2.5” 63.5mm
Front Wheel Base
11” / 279.4mm
Rear Wheel Base
14.5”/ 368mm
Chassis Length
34” / 864mm
Shipping Weight
112 lbs. / 51kg
Shipping Dimensions
39” x 17”x 8” / 980mm x 425mm x 195mm
