16
SECTION 9
CONTROL OVERVIEW
Stop Button
1. The STOP button on the Control Pod turns off the
power to the Hydraulic Motor, the Turntable Motor and the
Video Assist System. (See Fig. 9.1)
2. The Hydraulic Motor and Video Monitor will turn off
Automatically after a period of inactivity. It will come on
Automatically when any Hydraulic operation is initiated.
Wheel Lift
Raises and lowers wheel and tire up to and off the Center
Post. (See Fig. 9.2)
1. The Wheel Lift is controlled by the Wheel Lift Pedal.
(See Fig. 9.3)
The pedal has different modes of operation.
1. Push and release pedal. The Wheel Lift will lift wheel
up to top most position (If started in lowered position.)
2. Push and release pedal. The Wheel Lift will lower
wheel to bottom position (if started in raised position).
3. By pushing and holding the pedal and “feathering” the
pedal, you can slow the decent or ascent of the wheel.
(Use this method when lowering the wheel onto the Lug
Centering pin.)
CAUTION!
THE UNIT MUST BE PROPERLY OPERATED AND
MAINTAINED TO HELP AVOID ACCIDENTS THAT
COULD DAMAGE THE UNIT AND INJURE THE
OPERATOR OR BYSTANDERS.
THIS SECTION OF THE OPERATING INSTRUCTION
MANUAL REVIEWS THE BASIC OPERATIONS
AND USE OF CONTROLS. THESE INSTRUCTIONS
SHOULD BE REVIEWED WITH ALL EMPLOYEES
BEFORE THEY ARE ALLOWED TO WORK WITH
THE MACHINE.
KEEP THESE INSTRUCTION NEAR THE MACHINE
FOR EASY REFERENCE.
THIS MACHINE MAY OPERATE DIFFERENTLY
FROM MACHINE YOU HAVE PREVIOUSLY
OPERATED. PRACTICE WITH A REGULAR STEEL
WHEEL AND TIRE COMBINATION TO FAMILIARIZE
YOURSELF WITH THE MACHINE’S OPERATION
AND FUNCTION.
Fig. 9.2
Fig. 9.1
Fig. 9.3
Summary of Contents for RX3040
