3
SPECIFICATIONS
Type of drive system: Air / Electric-Hydraulic
Dual motors:
2 & 3-Hp / 208-230V 60HZ 1 Ph
Air requirement:
140-165 psi (10-11 bar)
Wheel clamping
method:
Threaded Shaft / Cones
/ Quick-Nut
Bead breaking system: Top and Bottom Power Rollers
Combined bead breaker
force:
10,600 PSI
Inflation system:
Standard
Wheel clamping
capacity:
10” – 30” / 254 mm - 762 mm
Tire width capacity:
3” - 22” / 76 mm - 559 mm
Max tire diameter:
44” / 1118 mm
Turntable speed:
360-Degree Rotation: 8-Seconds
Shipping weight:
1,410 lbs. / 640 kg
Shipping dimensions: 44” x 65” x 75” /
1118 mm x 1651 mm x 1905 mm
FEATURES
Touchless wheel-service technology
Accommodates virtually all OEM wheels and run-flats
Ranger RimGuard™ technology means expensive wheels
are handled with greater care
Equipped with four-piece mounting cone package
Wheel protection package comes standard
Reversible tool head
Ergonomic joystick control
Nylon & hardened steel tool head comes standard
Upper and lower bead breaker rollers
Power-assist traveling drop-center arm
Power-drop top assist roller
Hydraulic powered
Integrated wheel lift with easy-guide rollers
Convenient tire hook for lifting tires up and off the wheel
flange
Multi-size center cones and quick-nut makes mounting
wheels fast and easy
Target-lock™ control provides automatic locating of tool
head
Easy view camera and 7” LCD monitor
Turbo-Blast nozzle.
Pressure gauge with built-in pressure regulator and air
release valve
Italian-made rear-mounted hydraulic power unit
Five-station hydraulic manifold
High-precision aluminum-alloy valve bodies with durable,
corrosion resistant stainless steel spools
Auto-shutdown technology
Failure to follow danger, warning, and caution instructions
may lead to serious personal injury or death to operator or
bystander or damage to property.
Do not operate this machine until you read and understand
all the dangers, warnings and cautions in this manual.
For additional copies
or further information, contact:
BendPak Inc. / Ranger Products
1645 Lemonwood Dr.,
Santa Paula, CA. 93060
1-805-933-9970
www.bendpak.com
OPERATOR PROTECTIVE EQUIPMENT
Personal protective equipment helps make tire changing
safer. However, equipment does not take the place of safe
operating practices. Always wear durable work
clothing during tire service activity. Shop aprons or shop
coats may also be worn, however loose fitting clothing
should be avoided. Tight fitting leather gloves are
recommended to protect operators hands when handling
worn tires and wheels. Sturdy leather work shoes with
steel toes and oil resistant soles should be used by tire
service personnel to help prevent injury in typical shop
activities.
Eye protection is essential during tire service activity.
Safety glasses with side shields, goggles, or
face shields are acceptable. Back belts
provide support during lifting activities and
are also helpful in providing operator
protection. Consideration should also be
given to the use of hearing protection if tire service
activity is performed in an enclosed area, or if noise levels
are high .
THIS SYMBOL POINTS OUT IMPORTANT SAFETY INSTRUCTIONS WHICH IF NOT FOLLOWED
COULD ENDANGER THE PERSONAL SAFETY AND/OR PROPERTY OF YOURSELF AND OTHERS
AND CAN CAUSE PERSONAL INJURY OR DEATH. READ AND FOLLOW ALL INSTRUCTIONS IN
THIS MANUAL BEFORE ATTEMPTING TO OPERATE THIS MACHINE.
Summary of Contents for RX3040
